Quote assistant beta

Upload a model and get an indicative 3D print estimate.

Configure material, colour, quantity, layer height, infill, and finish. The result is a practical estimate in NZD before final printability review.

Start Estimate Choose Material

Upload design

STL and common 3MF mesh files are measured locally in your browser. STEP, STP, and OBJ get a rough fallback estimate for planning, then final review.

Drop a model here or choose file STL, 3MF, STEP, STP, or OBJ. File stays on this device until you send the request.

Configure print

Material list is broad so you can quote more than current stock. Not sure what to choose? Use the material helper.

Quantity Material Colour Layer height Infill Strength profile Finish Turnaround

Support material and print orientation are reviewed during slicing and included in the final confirmation.

Notes for final quote

Local NZD estimate

Estimated total $0

Upload a model to calculate an estimate.

Per part-

Material estimate-

Print complexity-

Lead time-

Estimate only. Final quote depends on printability, orientation, slicing/support needs, material availability, and functional requirements.

Email estimate WhatsApp estimate

This is not a slicer. It uses a Quality3Ds local prototype pricing guide from measured geometry where possible, then final review before confirming price.

Upload a model and get an indicative 3D print estimate.

Upload design

No file selected

Configure print